Skip to content
- Syringes, pump sprays, tubes, aerosols, wipes, pens
- Airduster and freezer
- Cleaners and coatings
- Greases and oils
- Thermal grease and resins
- Maintenance, test, repair and small scale production
- Paints and galvinising sprays
SMA – Surface Mount Adhesive
- One part UV resistant system with high green strength and dot profile
- Excellent mechanical strength
- Resistant to cleaning solvents
- Long term stability after cure cycle
- Syringe can be used by hand or dispensing equipment
- Packaging available in 10ml , 310ml
SMFL – Surface Mount Rework Flux
- Quick drying, no clean
- Can be used with hot air, hot gas or conventional soldering techniques
- Non tacky and no corrosive residue
- Very high reliability
- Packaging available in 200ml
Fre-Freezer
- Standard freezer for non-sensitive, electronic fault finding
- Can aid mechanical shrink fitting
- Non-flammable, cools down to -55°C
- Prevents damage to components during soldering
- Packaging available in 200ml & 400ml
HTG-High Temperature Grease
- High quality mechanical grease for lubrication and protection
- Wide temperature range of -20°C to +200°C (does not harden at high temperature)
- Fortified with anti-wear and anti-oxidant additives
- Water resistant
- Packaging available in 50ml
MPG-Multi Purpose Grease
- Colourless silicone lubricant
- Water repellent surface treatment
- Ideal for all mould release applications
- Very good thermal stability
- Reduces surface friction
- Packaging available in 50ml
NSCP-Nickel Screening Compound Plus
- 100% Ozone Friendly
- Excellent surface resistivity (0.3-0.7 ohm per sq. at 50 microns).
- Enhanced adhesion to wide variety of substrates
- Fast drying at room temperature
- Coats complex shapes
- Prevents static build-up
- Also available in bulk
- Packaging available in 400ml & 5 Litre
OSL-Silicone Oil
- High quality, multi purpose mechanical lubricant
- Silicone spray with excellent water repellency
- Long term lubrication for line printers, keyboards, platens, bearings, etc.
- May also be used as a mould release agent
- Packaging available in 400ml
SCO-Silicone Grease Compound
- High quality, multi-purpose electrical insulating compound
- Excellent water and moisture repellency
- Chemically inert, odourless and non-toxic
- Excellent resistance to tracking and corona discharge
- Packaging available in 35ml syringe, 400ml , 1Kg
SCP-Silver Conductive Paint
- 100% Ozone Friendly
- Excellent surface resistivity (0.3-0.7 ohm per sq. at 50 microns).
- Enhanced adhesion to wide variety of substrates
- Fast drying at room temperature
- Coats complex shapes
- Prevents static build-up
- Also available in bulk
- Packaging available in 400ml & 5 Litre
SPG-Special Plastics Grease
- Excellent plastics compatibility
- Offers outstanding low temperature performance
- Efficient mechanical lubricant for plastic/plastic or plastic/metal friction
- Ideal to reduce wear in timers, plastic cogs and gears etc.
- Packaging available in 35ml syringe, 900g, 10Kg, 20Kg, 52Kg
HDC- Cutting Fluid
- Industrial grade metal cutting oil
- Powerful lubricant suitable for ferrous metals, stainless and heat resistant steels
- Allows high speed punching
- Extends tool life
- Packaging available in 400ml & 5 Litre
DAS- Silicone Mould Release
- Colourless silicone lubricant
- Water repellent surface treatment
- Ideal for all mould release applications
- Very good thermal stability
- Reduces surface friction
- Packaging available in 400ml